Proware SB-3163E-F4A3 16 bay Fibre channel RAID

3U/16 bays, 4Gb/s Fibre to SATA II RAID 6 subsystem

Overview

Proware SB-3163E-F4A3 16 disk bays rackmount Fibre Channel - SATA RAID with two 4Gb/s fibre ports, provides hard disk, fan and PSU fault tolerance within a small 3U package..

Features

  • Supports RAID levels 0, 1, 0+1, 3, 5, 6 and JBOD
  • Supports hot spare and automatic hot rebuild
  • Allows online capacity expansion within the enclosure
  • Local audible event notification alarm
  • Supports password protection and UPS connection
  • Built-in serial port interface / or Ethernet for remote event notification
  • Dual host channels support clustering technology
  • Tagged command queuing for 256 commands, allows for overlapping data streams
  • Transparent data protection for all popular operating systems
  • RAID ADG provides the highest level of data protection
  • Supports multiple array enclosures per host connection
  • Instant availability and background initialization
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports 4K bytes/sector for Windows up to 16TB per volume set
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
  • Supports online Array roaming
  • Online RAID level/stripe size migration
  • Online capacity expansion and RAID level migration simultaneously
  • Online Volume Set Expansion
Proware
Proware SB-3163-F4A3
Proware SB-3163-F4A3

Exceptional Manageability

- The firmware-embedded Web Browser-based RAID manager allows local or remote management and configuration
- The firmware-embedded SMTP manager monitors all system events and user notification automatically
- The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
- Menu-driven front panel display
- Innovative Modular architecture

RAID Function

- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- E-mail notification
- UPS connection
- Bad block auto-remapping
- Array Roaming
- SNMP Protocol Support
- Multiple RAID selection
- Online RAID level migration
- Background RAID initialization
- S.M.A.R.T.

Specification

Model SB-3163E-F4A3
Form-factor 3U 19-inch rackmount chassis
RAID processor PowerPC 440SP
RAID Level 0,1,3,5,0+1,6,JBOD
Cache memory 512MB ~ 4G
No. of channels (host+drive) 2 + 16
Host bus interface FC-AL (4 Gb/s)
Drive bus interface SATA II
Data transfer rate Up to 400MB/Sec
Back plane board SATA II
Hot-swap drive trays Sixteen (16) 1-inch trays
Hot-swap power supplies Two (2) 60W power supplies w/PFC
Cooling fans 4
Battery backup Option
Power requirements AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~63Hz
Environmental
Relative Humidity: 10% ~ 85% Non-condensing
Operating Temp: 10°C ~ 40°C (50°F ~ 104°F)
Physical Dimensions: 133(H) x 482(W) x 600(D)mm 5.24(H) x 18.98(W) x 23.62(D)inches
Weight 20.5kgs / 45.1Lbs (without drives)